VERY Inconsistent Velocity

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Corbet
    Registered User
    • Apr 2003
    • 358
    #1

    VERY Inconsistent Velocity

    So I'm finally get my mag up and running, heres the specs:

    Classic Level X Valve
    Custom Milled Rail
    Y-Grip
    ULE Mainbody

    I took it to the paintball field as my back up gun and I really needed to be chronoed. So I did. The problem was it wasn't consistent. I'd go from shooting 238 - 245, turn the velocity adjuster slightly and I'd be getting speeds of 345+ (this also caused the trigger to be very heavy to pull)

    What could be the problem?
    Tags: None
    • REDRT
      Mags, Y use anything else
      • Apr 2004
      • 1854
      #2
      Well in my experiance the level 10 doesn't like the lower velocities like you were chronoing in at. Getting down in the 260 fps area you just have to use that short stock spring. My emags get crazy inconsistent with the medium spring in and trying to chrono at the 270 range.
      Also maybe your valve just needs a good lubing...

        Comment

        • rb211
          Poodles suck!
          • Apr 2004
          • 438
          #3
          Could also be your reg seat.

            Comment

            • Corbet
              Registered User
              • Apr 2003
              • 358
              #4
              Originally posted by rb211
              Could also be your reg seat.
              The Thing is a actually just bought a new reg seat along with a spring and the pin. I'm gonna oil up my gun a little more and see if that helps.

                Comment

                Previous template Next
                Working...