sear questions

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Manuel_FZR
    This is my MiniMag ...
    • Oct 2001
    • 563
    #1

    sear questions

    Hello!
    What is the difference between a ReTro sear and a sear for the normal AIR Valve?
    Will the ReTro valve work with the normal sear of an AIR Valve?
    Thanks!
    Greets Manuel
    .:| levelx retro z-minimag |:..:| spearhead #192 |:.
    .:| ---> looking for Flatline 4.5K or AA Apokalypse 2K <--- |:.
    Tags: None
    • gimp
      Registered User
      • Jan 2001
      • 2368
      #2
      The sear for the normal AIR valve won't work with a retro valve. If you order a retro valve for your mag, to upgrade from your AIR valve, it should come with the new sear you'll need.

        Comment

        • BlackVCG
          Grubby Owner

          • Oct 2000
          • 4956
          #3
          The normal Mag sear will work with the Retro when it's being used in an Auto or Minimag. The sear in the E-Mags and RT-Pro's will not work in regular Mags. The Retro Valve will come with a new sear, but it will be the same as the sear in your gun right now.
          My Feedback

            Comment

            • Manuel_FZR
              This is my MiniMag ...
              • Oct 2001
              • 563
              #4
              Thanks BlackVCG!
              I was shure that this works, but I wanted to know it exactly! (they both look the same) Only the sear for a normal RT (not the ReTro and not the Pro) is different.
              Greets Manuel
              .:| levelx retro z-minimag |:..:| spearhead #192 |:.
              .:| ---> looking for Flatline 4.5K or AA Apokalypse 2K <--- |:.

                Comment

                • BlackVCG
                  Grubby Owner

                  • Oct 2000
                  • 4956
                  #5
                  The RT-Pro and the RT sears are the same, only the RT sear has a roller bearing and the RTP sear has a brass bushing.

                  Either way, they both have an I.D. too small for the Mag sear axle pin to fit through. The E-Mag sear has the brass bushing like the RTP sear, but it is only used in the E-Mag because it has the arm on it for the solenoid plunger.
                  My Feedback

                    Comment

                    Previous template Next
                    Working...