i'm having trouble with my rt valve bouncing, some days it does other days it doesn't, what is the proper set up for a rt-valve to bounce i.e air psi, lvl x ect?
-
-
the easiest thing to look for, is the output of the HP tank. 850psi INTO the gun is a good start.
If it bounces sometimes, and not others, check that little oring inside the on/off. Change it, lube the hell out of it. The pin will hang up on it. I push a small allen key through it to loosen it up.
The trigger rod can also play a part. Look closely at it and see if it is helping or hindering. If its a little too long it can stop the gun from bouncing.
Also, the length of the on/off pin is a major factor. The shorter, the more bounce. AGD sells different length pins. I shortened mine (from the bottom, the part that touches the sear) -
thanksComment
Comment