Spacer Question Help!

[TheMagMan]

I have a RT Pro and I was wondering if the spacer kit would help me in any way even if I don't need it. It's not leaking any air down the barrel or anything.



Thanks

[TheMagMan]

Oh come on i'm sure some one has an answer to this easy question.

[TheTramp]

If you aren't getting bolt stick or a leak down the barrel you don't need to change the PT spacer. If you get lucky you could get a little better trigger feel by going up or down one spacer but there might not be any improvment. Might as well stick to the spacer that works.

[TheMagMan]

Ok I just put some drops of oil in the vavle and was dry shooting. I was at about 750psi left in the tank so I unscrewed it and the oring snaped off. I put anothe roring back on and gas it back up and I hear a ton of air leaking down the barrel. Could this be from the low pressure in the tank? I couldn't shoot either because it didn't kick back the sear in place. But leaked all my air out the front.

[TheMagMan]

anyone?

[Paintchucker]

I get leaks down the barrel when I am low on gas. Before you worry too much about it, fill the tank and try it...