warp test

[quasimorte]

Here is the setup, set the warp on the ground with a full hopper atached to it. from the output port attach a hose that runs straight up for 5 or so feet. turn on the hopper, turn on the warp. how high would you expect the balls to go before the warp stopped? what would you expect to have stopped the warp, weight of balls, lack of power in motor? give me some ideas, i do not currently have a warp so i can't run this test my self. would the test damage the warp? and finally is anyone willing to run this test for me? let me know what you guys think, this would be a way to test the power differences between the 9v and 12v mods as well as how effective the warp would be on a remote type setup.

thanks
quasi

[rtfire1]

Here is the setup, set the warp on the ground with a full hopper atached to it. from the output port attach a hose that runs straight up for 5 or so feet. turn on the hopper, turn on the warp. how high would you expect the balls to go before the warp stopped? what would you expect to have stopped the warp, weight of balls, lack of power in motor? give me some ideas, i do not currently have a warp so i can't run this test my self. would the test damage the warp? and finally is anyone willing to run this test for me? let me know what you guys think, this would be a way to test the power differences between the 9v and 12v mods as well as how effective the warp would be on a remote type setup.

thanks
quasi

on 12v i had a 4 foot hose set up and if feed the paintballs till the hopper ran out

[quasimorte]

, cool thanks for testing this.
what type of speed where you getting? 20bps, or was it going slower? is this part of your setup or did you just run the test? Get enough of these together and you could do a paintball fountain

thanks
quasi

[rtfire1]

i did this about 6 months ago because me and a friend wanted to see how much tine it would tank for the 12 v mod to push the paint out the tube and it just happend that we had a 4' that was not cut. it looked cool