doing some custom milling on frame?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jmulhollen
    Registered User
    • May 2006
    • 40
    #1

    doing some custom milling on frame?

    i am curious if anyone knows why i shouldnt cut out what i have drawn in red in order to lighten up the powerlite frame a bit?

    also.....the three screws i have circled in pink which hold on the sight rail...are the neccessary? meaning...can i remove them and the sight rail without air leaking out of them? or will air come pouring out of thos holes also?
    thanks...

    Tags: None
    • jmulhollen
      Registered User
      • May 2006
      • 40
      #2
      im not a moron...i cannot test to see if air will leak since my valve is out of commision at the moment.

        Comment

        • athomas
          Of course it works-its AGD
          • Jan 2002
          • 8039
          #3
          The front 3 screws that you have colored red, are fine to mill down. They do nothing except provide a place to attach accessories and/or a sight rail.

          If you mill out the grip frame as indicated, you will weaken it structurally. A strong grip will chrush it. It also will not hold a bottom line very well due to the lack of strength. You will need to maintain a cross member to keep the frame from twisting.
          Except for the Automag in front, its usually the man behind the equipment that counts.

            Comment

            • jmulhollen
              Registered User
              • May 2006
              • 40
              #4
              damn....i guess losing the sight rail will help some.....ill probably leave the frame alone for now though.

              thanks.

                Comment

                Previous template Next
                Working...