I recently bought Center Flags Hyper Frame and I am tring to put it on a micromag but the gun doesnt want to fire. I dont think that the Sear is hitting the silanoyde (that is whatI think). Everything on the frame works perfect (electrics). please help.
-
-
do you have a ult installed ? -
No I dont. I thought that the ULT was for guns that where not electronic. Well Ill try it and see if it works.
ThanksComment
-
The hyper frame comes with with its own on off valve or at least the one I bought did.
Its the same as the reg one off but the on off pin is thiner. Same idea as the ult but not taken to that extreme. The solenoid in the hyper frame is small to small to guarantee that a stock air or rt valve will fire. It seems a ult on off would work like the one center flag made for the hyper frame. but you would need to be care full pulling the gun apart its easy to bend the on off that comes with the hyper frame and more so the ult.
You need to make sure the safety is off, stick something in that second hole back by the field strip screw to push the on off pin all the way in before you pull the gun apartComment
-
agd
[LEFT]I'm having same problem called agd they said ult only works with x valve. i have a mini mag valve. any help would be apprecaited thanksComment
-
I havd a micromag with a hyperframe on it and it is using a ult with 2 shims and a Classic valve andit shoots well .... atleast I think it does contemplating putting a video up ...
Comment
Comment