X valve Problems?

[magbackforgood]

I just got a new x valve and had it installed. I have put about 700 paintball through and now it sounds like the bolt is sticking. What causes this? and How do i fix it? I think its something with the level 10 but not sure. Any help with this will br greatly appreiciated.

[paintman1142]

you probally just need to tune the level 10 bolt

[Cow hunter]

you probally just need to tune the level 10 bolt

i agree, try the next size up carrier

[magbackforgood]

i agree, try the next size up carrier

i will try that and get back to you. thank you.

[flyingpootang]

Your Xvalve has just broke in the o-ring. The trick with the carriers is to get the looses one that will not leak using the same broken in oring. Next tune the Level 10 bolt with 0 shims place a squigee about 1/4" away from the bolt and fire it. The bolt should stay forward. Next add 1 shim at a time and re test the marker as above until the bolt reset itself which will indicate a tuned bolt...Real simple and once it's done your good for a long long time