Intellifeed on a 2X Dye?

[The Mag Man]

I know this can be done, <b>I already tried a search</b> but I did not find any instructions on how to do this. If anybody can help me, that would be great. Please include a list of parts that I may need. Pictures would also be helpful, thanks.

[deded]

First check out this page

http://www.airgun.com/manual.html

and click on the "intelliframe tutorial"

This should give you a pretty accurate parts list, you'll need everything listed except the screws. (unless you'll be screwing the switch into some kind of bracket)

The roller microswitch fits pretty well under the sear, and can be activated by pulling the trigger, unfortunately, it is really hard to get the microswitch to stay in place. (This is the advantage of the intelliframe)

The way I finally got my microswitch to stay put was krazy glue. Luckily, I got it right the first time, otherwise I'd be kinda screwed.

The wiring is exactly the same as is in the intelliframe tutorial, the only thing that is different is the actual mounting of the switch.

Good luck!

[tunaman jr]

talk to the tunaman

he knows his dye stuff

[speedballbanks]

i did it with my benchy and i used electrical tape and it came out perfect no movement in the switch and you can barely see the electrical tape.