Experiencing shuff when walking the trigger

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kingpen509
    M.O.B. Representer!
    • Jan 2006
    • 599
    #1

    Experiencing shuff when walking the trigger

    I have a X-valve with ULT and a ULE body and Chimera.

    The level 10 works correctly and doesnt leak. However when I attempt to walk the trigger it tends to shuff on me. If I do the single finger rapid fire as fast as I can it does all right but thats probably only 8,9 or 10 bps what else can I do to fix the problem. Is there something I can do to eliminate the shuff?

    Thanks
    Tags: None
    • athomas
      Of course it works-its AGD
      • Jan 2002
      • 8039
      #2
      When attempting to walk the trigger, you are short stroking the gun. Without complete trigger cycles, you won't be able to prevent the odd chuff.

      Try adding a ULT shim or 2. By reducing the amount of distance the ULT has to travel after the bolt is caught by the sear will reduce the recharge time a bit and also reduce the movement required by your fingers while walking the trigger.
      Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        • kingpen509
          M.O.B. Representer!
          • Jan 2006
          • 599
          #3
          OK I will try that right now!

            Comment

            • flyingpootang
              Magtechian with X disease

              • Dec 2005
              • 2276
              #4
              SpyderMag frame with a ramping board or Emag lowers with Xmod software. Jsut funning you. I would increase the input to 900-950 and find the sweetspot on your trigger and let it rip

                Comment

                Previous template Next
                Working...