Mag burping/farting and other Q's

[RedEyes]

So I came up on a TKO mag, I think, from my uncle and I let my little cousin use it for the day. This mag was never cleaned when I got it. My bro cleaned and lubed it the night before. Before we were sent to the fields the mag started burping or farting from velocity adjuster. The mag was hooked up with co2 straight to the valve. Would this happen because how the mag was made, to leak out air from the adjuster?

My other question is how to ID a Karta body, like if the Karta bodies and rails came with ID #'s.

Also anyone know whats the turn around time for DW to send out their stuff. I need to get a grip!

[Pneumagger]

Use oil... not grease. When I eat greasy foods, I tend to Burp and fart too.


Try turning down the velocity, might be the reg venting over pressurized chamber. Or might be getting straght Liquid into the gun. You gotta have an expansion chamber, antisiphon, palmers Sab, or remote to keep liquid out.

[marpat]

Use oil... not grease. When I eat greasy foods, I tend to Burp and fart too.

[flyingpootang]

sounds like the oring on the piston is chipped. There is a safety degassing port if your velocity adjuster is screwed out to far. It prevents your piston from putting a hole in your head should you remove your velocity nut before degassing the marker. Adjust it slowly and clear the pressurized air before you try and re-chronoing the marker. Also if you are not running a J tube on your Co2 bottle it maybe sucking liquid and caussing it to fart.