HELP Nedd a list of automag parts.

[Matthew Petch]

I am planning on building a mag. Is there any way that I can get a list of the parts that I will need to build a mag. I want to build the gun from scratch.

This would be a big help.

Thanks

Matthew

[back2integrity]

complete valve w/ bolt
body
rail
sear/sear pin
trigger frame
barrel
air fittings/asa

Guys am I missing anything?

[mag_lover05]

the screws^^^ and a forgrip most likely.... and bolt spring..if ULE body, DETENTS

[back2integrity]

Yeah, screws. You need a back field strip screw, and a front frame screw

[Matthew Petch]

Frame

What type of frame would yall suggest....

[paintman1142]

at least intelleframe

[back2integrity]

While we're on this subject of what is required to build a mag, i saw from Rogue's link that "Rail Bushing" is required. I've heard/read this many times, but I run several of my mags without rail bushings with no percieveable problems caused by it. Am I harming my mag? Why are rail bushings needed? Thanks.

[Dark Frost17]

y grip....

[Dark Frost17]

While we're on this subject of what is required to build a mag, i saw from Rogue's link that "Rail Bushing" is required. I've heard/read this many times, but I run several of my mags without rail bushings with no percieveable problems caused by it. Am I harming my mag? Why are rail bushings needed? Thanks.

i have noticed a few problems with my valve sliding a little further back without it.... and it keeps everthing in place when you take tha valve out...

[mobsterboy]

best bet is if you havent had a mag before, get one. They are easy to take apart, but it helps you to realize a) what they are supposed to look like b) how they run and c)what you like/dislike
everyone's likes are different. What i could despise, you could love. it'll make you appreciate your mag more too if you start from the bottom and go up