Pneumag VS ULT

[Remagk]

Planing on ligthen up my trigger pull, after reading several pneumag thread still got couple question on mind.

1. no doult 2-10oz trigger pull of pneumag able to walk, what about the ULT with 15oz pull
2. will my PMI tank able to catch up the rate of fire

current setup:
ULE body
Intteli frame
Retro valve
Lv 10 bolt midium spring
Dye ultralight 2pcs barrel
Kapp II drop
PMI 45ci/4500 fix output

Thnaks

[scrumpy]

A properly tuned ULT is easily walkable. I don't have any experience with PMI tanks, sorry.

[Mikey B]

I had a ULT on my mag and could walk it just fine.

[the mag guy]

you just gotta get used to shooting a ult then ya got it

[wjr]

Mabye other people have better luck with their ult or something. I can barely notice a differance with a ult in my mag. It's an emag valve though... mabye that's it.... Then again I'm using a 2 finger benchmark. Could be that...

But since you're using an retro valve, you'll have to get it drilled out to except the ULT. If you're make a pneumag then you can definatly walk it and you won't have to modify the valve.

[Remagk]

I had a spare emag valve too, but it doesn't have two on-off top oring. will it accept ult?

[geekwarrior]

I had a spare emag valve too, but it doesn't have two on-off top oring. will it accept ult?

doubtful

[Pneumagger]

needs milled out. It's a very cheap thing to have done.

[Remagk]

Seem like more people are had ULT than phneumag, guess it was cheaper/easier to upgrade or less thing to mess with.

Remember saw a thread that mention a place to mill the valve, but just can't find it anymore. Anyone know around NJ has a mag smith or anyone I can contact?

Thnaks

[Pneumagger]

IM "slipoftheknife".he had his done recently for $10 IIRC

[SR_matt]

i havent had good luck with PMI tanks, neither have a decent amount of my friends.

true story: on my sniper 2 pump gun i run a palmers female stab to a gass through running about 220 psi. my PMI tank had 1000 (yes 1k) is it and it was not able to recharge fast enough to keep my valve closed on my sniper. i put a co2 tank on it and it was able to keep the vavle closed up till it was basicaly empty (less than 5 seconds of draining on the co2)

my friend can easily put shoot his old PMI tank on his mag and he doesnt shoot really fast.

-matt

[Remagk]

umm, need to replace the tank as well.........
any recommadation?

[SR_matt]

well its not adjustable but the gurellia air (soilder not ape gurellia, i cant spell well) tanks are supposed to be awesome, i got one but i havent had a chance to use it, seems well built and i havent heard any bad about them.

-matt

[Remagk]

By just reading/browsing around, another question come up my mind, is there ULT and pneu-trigger comparable?
Maybe just do the ULT for now and later have mode/fund to move onto pneu-trigger

[personman]

By just reading/browsing around, another question come up my mind, is there ULT and pneu-trigger comparable?
Maybe just do the ULT for now and later have mode/fund to move onto pneu-trigger

Yep, ULT actually helps make the pneumatic pull lighter as well. :)

ULT isnt a bad upgrade. I've had mine for a while but I keep my RT on/off for those times when I just gotta bounce at 20bps :)