Xvalve leaking, can't stop it.

[Pneumagger]

I cant seem to find a way to stop my xvalve from leaking!!! Tried a few orings too.

it is leaking out of the the two small holes now and from between the reg and valve body.
I can't stop it. Is there somone that can fix these around here that I can just send the valve to to give a tune up? Do xvalves have a "star" warrenty thing?

[the mag guy]

did you open it up and make sure there was no dirt on anyhting? Use that exploded diagram to dissassemble it and clean everything and make sure nothing is missing.

[Pneumagger]

It is spotless inside...I took THE WHOLE THING APART (even the mini spring assembly in the middle)

I cleaned all the aluminum parts with alchohol swabs so it was clean enough to eat off of. Then I relubed everything and reassembled. I got the leak between the two halves fixed by replacing the reg oring, but the two small holes persist in leaking.

[the mag guy]

for some reason mine leaked out of the bleed valves for a bit when I first put on the tickler. i dont know if it was coincidence or not, but it went away after firing, but mine was a very slight, but hearable leak. I just dupned like 12 drops of oil and gassed 'er up.

[Pneumagger]

Ya, so who can I send this thing to fix...I'm sick of it.

[robnix]

Ya, so who can I send this thing to fix...I'm sick of it.

Tuna did a bang up job on my emag.

[pb4jc]

$?

what does a TUNA TUNE-UP cost on a mag i have a ULE RTP basically a RPG Paradaigm Pro
X-Valve
LX
ULT
All that fun stuff if anyone could link me to a thread or a website would love to know what it costs to have him go through your mag for you.
Thanks

[rb211]

Just out of curiosity, have you changed the o-rings and spacer on the reg valve pin? They could be the source of your problem.

[Hexis]

Duct tape, problem solved.

[Beemer]

Just out of curiosity, have you changed the o-rings and spacer on the reg valve pin? They could be the source of your problem.

How do you do that when it comes as an assembly???

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=115&categoryID=23

[A-Tach-One]

How do you do that when it comes as an assembly???

http://store.airgun.com/index.cfm?fu...&categoryID=23

Actually the o-rings and spacer on the reg valve pin come in the XValve O-Ring replacement kit. But dangit, what a pain.

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=458&categoryID=16

[rb211]

You hit that one on the head A-Tach, they are a pain. On the o-ring side of the reg pin there is a small split metal ring which retains the o-rings and spacer. Pop this off and everything slides right off. As mentioned above, the rings, spacer, and even a new retainer ring comes with the X-Valve parts kit. Change these, throw it some oil, and you will probably be back in business.