vavle/ cocking probs

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cockarock
    Registered User
    • Jul 2006
    • 2
    #1

    vavle/ cocking probs

    i just got a micromag r/t off of ebay and it has a problem.

    the valve doesnt seem to be getting enough pressure. my tank is a high output nitro tank and it is full. but the problem is that it doesnt get enough pressure.

    i changed all of the o rings in the gun and made sure everything was clean, but it still doesnt work.

    also there is a small air leak which comes out of the front of the marker

    any help is greatly appreciated

    thanks
    Tags: None
    • JRingold
      Big Fat Guy
      • Apr 2002
      • 772
      #2
      Do you have a gauge that makes you think the valve ins't getting the right inut pressure?

      Are you having an issue where the bolt isn't resetting? Can you push the bolt back with a squeegie?
      I went like this :shooting:
      He went like this :tard: then like this :wow: then like this :cry:
      Now he shoots a Mag too...

      -JR

        Comment

        • cockarock
          Registered User
          • Jul 2006
          • 2
          #3
          aight it doesnt sound like it is getting enoung pressure alos when i tried to fire some rounds they just got stuck in the barrel

          yes i can push the bolt back with my finger

            Comment

            • SocialD
              ^ wanders around aimlessly
              • Jan 2003
              • 229
              #4
              Make sure that there aren't any restrictions between the bottle and valve. Make sure, and I know that it sounds obvious, that there is air in the tank. Make sure that the velocity is turned up on the marker.
              I'm a lefty that plays with an old school RT with H/L. I bought a warp and all is right with the world.
              SocialD's feedback
              SocialD's stuff for sale
              Jaz Air Technologies barrels

                Comment

                • flyingpootang
                  Magtechian with X disease

                  • Dec 2005
                  • 2276
                  #5
                  Use the short gold spring. The longer springs need the velocity adjuster to be turned up to work which equals a higher FPS. Dose it have a L10 bolt? If so switch to the next tightest carrier while using the same o-ring. after that tune the L10 by adding shims and placing a squigee about 1/4" away from the bolt and fire it. If it dosen't add 1 shim at a time until it dose....

                    Comment

                    • JRingold
                      Big Fat Guy
                      • Apr 2002
                      • 772
                      #6
                      Is this an old school R/T, or an R/T pro? What grip frame does it have on it?

                      We had an old R/T with a Benchmark frame and we had to re-adjust the trigger stop and the sear length because we were short stroking it causing the sear not to catch the bolt all the time.
                      I went like this :shooting:
                      He went like this :tard: then like this :wow: then like this :cry:
                      Now he shoots a Mag too...

                      -JR

                        Comment

                        • Coralis
                          Hyper Micro
                          • Aug 2005
                          • 1285
                          #7
                          turn up the velocity

                            Comment

                            Previous template Next
                            Working...