Minimag Valve not firing

[nate2k191]

The minimag valve is not firing, i tried 2 classic on/offs and the ULT - its pretty oiled up too, Has a level 10 as well. im using a fresh 12 gram co2 cartridge every time i try, i think i should get some shots out of it.

[MANN]

hope this helps

are you sure that you have the velocity turned up enough?
You might also want to go down in springs. Maybe try the stock spring to see if it will fire.

I have used 12 gram cartridges before, and i know they will work on level 10, so its probally not the cartridge

[nate2k191]

yea, i forgot i put a Level 10 on in place of the L7, so i had to crank the velocity way up until it shot, then it was fine.