Weird RT leak

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bad64chevelle
    Registered User
    • Nov 2005
    • 11
    #1

    Weird RT leak

    I recently purchased another RT mag and the gun it stock. I hooked up come compressed to it and it leaks from the two small holes on the back of the rail below the velocity screw. Any Ideas of what this can be? I searched around a bit and came up short. Any help would be great. Thanks!

    jon
    Tags: None
    • Coralis
      Hyper Micro
      • Aug 2005
      • 1285
      #2
      probably the piston oring needs to be changed

        Comment

        • bad64chevelle
          Registered User
          • Nov 2005
          • 11
          #3
          Wouldnt that cause a leak out of the blow off through the velocity adjustment hole?

            Comment

            • Beemer
              I could tell you but then.

              • Oct 2003
              • 3250
              #4
              Is that a classic RT with the banjo bolt?

                Comment

                • bad64chevelle
                  Registered User
                  • Nov 2005
                  • 11
                  #5
                  Yeah it has a banjo bolt, I believe I fixed the problem, I took it apart and then lubed it up alot, and it seems to have fixed the problem for now. My compressed tanks are both very low, so tomorrow after work I will get some and see what happens.

                    Comment

                    • Beemer
                      I could tell you but then.

                      • Oct 2003
                      • 3250
                      #6
                      There should be small allen screws in the holes. Might need a little thread sealer

                        Comment

                        Previous template Next
                        Working...