Stock Mag to R/T?

[pb_stud]

Shortly here, I will be reciving my first automag out of a trade. I'm kinda new to AGD's stuff as well. I was curious though if it were possible to put an R/T on a stock automag in any way. I'm new to automags, not paintball so do be afriad to get technical if need be. Thanks in advance!

[Pneumagger]

Any automag can be upgraded to a reactive valve with the RetroValve, Xvalve, Emag valve, Emax, RTX Valve, Micrommag RT, ... did I miss any guys?

Basically all those valve names are for basically the same valve. A "Classic RT" valve will not fit in a standard mag.



"Now go away...or I shall taunt you a second time!" (thread hijack...Name that Movie)

[MANN]

rt pro valve. but I guess thats the same as the others.

[pb_stud]

Ok, just to be clear. This isn't my gun, but it's this model. Will an r/t valve fit and if so, is there anything else I would need to buy for it?


EDIT: Correction, I just found out it was a minimag like this...

So again, just to be clear, I CAN put an R/T valve on it and have it shoot "fully auto"? (I already understand the r/t concept)

[flyingpootang]

It'll bounce like crazy aka runaway if the input pressure is at or above 900 psi. The higher the input pressure the faster the bounce. If your buying an RT valve make shure you get a L10 bolt to avoid chops. At that speed you'll need it.

[geekwarrior]

you can put an rt valve on that marker

[pb_stud]

Can I just buy a lvlX r/t valve?

[pb_stud]

Ok, this is the actual gun, I'm not sure what it is though since I dont have the gun here yet. It' just that I was told by the tech support that the r/t valve didnt work with one of the guns, but i wasnt sure which one.

[rb211]

The only valve that wont work on that one is the classic RT valve. As mentioned above, the Retro, X, Emag, Emax, Micromag RT, RT Pro valves will work. Just dont get a RT classic valve.

[ttink]

Can I just buy a lvlX r/t valve?

You can buy both at the same time but you still need to install and tune the level 10.