Light weight setup questions.

[cyrus-the-virus]

Ok I've decided to start building my automag. I'm going for the lightest setup possable but I need some anserws.

1: What is the lightest body?
2: What is the lightest rail?
3: Do they make a railmount that would fit on the rail of a mag?
4: Is it possable to use a ULT kit on a classic valve?
5: If the ULT is a no go, what mods can I do to make the trigger pull a little lighter on a classic valve.

that's about it actually

My dream mag setup: If you have any sugestions tell me. X-valve or other RT's are not an option.

Valve: Classic valve (CO2 compatable)
bolt: level 7 (less hassle, better air efficency)
Body: ______
Rail: ______
Grip: AGD Bycicle grip, reveresed 15* angle. Or if I can get it one of THESE
Trigger frame: The AGD single trigger.
Barrel: 14" DW wisper barrel, 12" PPS unvented Brass barrel, 6" freak barrel.
Hopper: Empire reloader II, maybe a revy.... open to sugestions.
Misc: Killa magnetic detents, lowrise or no rise clamping feed neck,
ASA: Open to sugestions

Milsim accesories: opsgear Tri-Rail Barrel Mount, accesories for the rail mount.

MODS: ULT if possable, past that nothing but open to sugestions




THANKS!!!

[3DSteve]

Level 10 bolt is lighter and really not much of a hassle...one setup and your done
it really is the best improvement made for mags, but
if you don't want it, you'd better get the reloader b.
it's forcefeed, while the revy is gravity feed. forcefeed helps fight the blowback you get on a lowrise centerfeed body.
and check out www.themagsmith.com
or www.tunamart.com
for lightweight gear

[craltal]

Ok I've decided to start building my automag. I'm going for the lightest setup possable but I need some anserws.

1: What is the lightest body?
2: What is the lightest rail?
3: Do they make a railmount that would fit on the rail of a mag?
4: Is it possable to use a ULT kit on a classic valve?
5: If the ULT is a no go, what mods can I do to make the trigger pull a little lighter on a classic valve.

that's about it actually

My dream mag setup: If you have any sugestions tell me. X-valve or other RT's are not an option.

Valve: Classic valve (CO2 compatable)
bolt: level 7 (less hassle, better air efficency)
Body: ______
Rail: ______
Grip: AGD Bycicle grip, reveresed 15* angle. Or if I can get it one of THESE
Trigger frame: The AGD single trigger.
Barrel: 14" DW wisper barrel, 12" PPS unvented Brass barrel, 6" freak barrel.
Hopper: Empire reloader II, maybe a revy.... open to sugestions.
Misc: Killa magnetic detents, lowrise or no rise clamping feed neck,
ASA: Open to sugestions

Milsim accesories: opsgear Tri-Rail Barrel Mount, accesories for the rail mount.

MODS: ULT if possable, past that nothing but open to sugestions

THANKS!!!

ULT's can be hit or miss in a classic valve. You could always replace the stock on/off with an RT on/off. it will drop your pull by about 50%

Get teh level X, it's really not much of a hassle and teh effeciency difference is barely noticable.

Lightest production body would be RPG Pariah body at 4.2 oz (including feedneck and an AGD detent)
Lightest production rail would be RPG Shadow rail at 3.0 oz

I'd suggest the Wisper as your barrel if you are looking for light weight. The PPS brass, while exceptional, isn't light, not even close.

for asa, I like the hybrid grindz, it's got a push button on/off with a purge. It's pretty small also.

[olinar]

actually the dallara rail only weighs 2.7 ounces,im lookin to get a new rail so ive been lookin around lol

ULT's can be hit or miss in a classic valve. You could always replace the stock on/off with an RT on/off. it will drop your pull by about 50%

Get teh level X, it's really not much of a hassle and teh effeciency difference is barely noticable.

Lightest production body would be RPG Pariah body at 4.2 oz (including feedneck and an AGD detent)
Lightest production rail would be RPG Shadow rail at 3.0 oz

I'd suggest the Wisper as your barrel if you are looking for light weight. The PPS brass, while exceptional, isn't light, not even close.

for asa, I like the hybrid grindz, it's got a push button on/off with a purge. It's pretty small also.

[geekwarrior]

actually the dallara rail only weighs 2.7 ounces,im lookin to get a new rail so ive been lookin around lol

and its perty

[bentothejam1n]

the bike grip is pretty heavy. you could probably get a cp foregrip and it be lighter

[LiveWire]

if you want you could put an RT on/off in that classic valve, i've heard good things about that. either way... you have chosen wisely... welcome to mags

[Mayzons]

logic rail

I have a Logic Alpha Rail on my mag....they are not made anymore...so, VERY hard to find. I was extremely lucky to get my hands on one....it is only 2.1 ounces...

I have a brand new raw logic alpha rail for sale $80 shipped