On my mag I have a ReTro Valve and Lvl 10, and with the reactive trigger, some of the refs at the field I was playing at thought I was using a full auto or burst mode, and I almost couldnt play. Fortunately, the owner knew what it was, so I was allowed to keep playing. I was wondering if there was a way to fix this, or change it doesnt shoot like it does. In a thread I posted earlier, someone said I that I could use a ULT kit to change that, so I went into the ULT sticky, and it said that you couldnt use a ULT with a Retro Valve. So is there anything else I can do for this?
-
-
turn your input pressure down or use a longer on off pin. -
or send the valve to Brad, mill it to accept ULTComment
-
Some of the later Retro valves were actually milled to accept the ULT kit. Someone more educated in the ways of the Retro will have to tell you the difference however.....Comment
-
Is changing the input pressure an easy thing to do? and if I got a picture of the valve, would someone be able to tell if it would work? If so, what would I need to take a picture of?Comment
-
Originally posted by UnderCurrent
I wish i could get my retro + level 10 to have some insane reactivity.Comment
-
It's the adjustment of your sear. It took me a couple hours of playing with it but my trigger hops like mad now.I wish i could get my retro + level 10 to have some insane reactivity.Comment
-
What did you do?Comment
-
I just kept adjusting the length. Did it about 2 years ago and haven't had to set it since. One direction will make it worse and the other will make it better. Took me a full scuba tank to get it right though. Also had to set my Level 10 a little tight to get it to work. It doesn't ever break paint but it will fold the dollar bill rolled up in the chamber (like shown in the AGD video with Tom).Comment
Comment