Grrr.. My Emag valve is leaking out the top hole on it. I just recently replaced the regulator piston to prevent it leaking out the back, so could it just be breaking in? I oiled the gun up and it still leaked out the top. Another funny thing is if I fire the gun, it stops for about 15 seconds but then leaks again. Any help?
-
-
Out the top? Do you mean the feedneck? If so, then you need to remove a shim from the powertube. If it still leaks, then go to the next smaller carrier size.Except for the Automag in front, its usually the man behind the equipment that counts. -
No, I mean out the top hole of the valve. I'm gonna try to get a pic and circle the hole.
EDIT: Blah, can't find one.. doesn't anybody know what I'm talking about? It's a small hole on the top of the valve when it's on the gun.Last edited by Dartshot123; 09-04-2006, 06:05 PM.Comment
-
Take the regulator piston assembly out the back and clean the back section of the valve. Clean the oring around the regulator piston assembly, or replace as necessary. Put the assembly back in and see what happens.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment