Warp feed question

[Wacko-Micro]

Hi, Ive have been haveing some problems w/ my warp feed on my micro mag. I have set the adjustment for senitivity to the properness for the micro mag. But, while shooting, the warp will not keep up w/ my gun! The wheel spins when i shoot, but it dosent spin long e-nuf for the balls to make it to the chamber. So, basicly, when ever i try to shoot fast, it turns blender like. What should I do? Is there another adjustment I dont know about? Or am i just screwd? LMK asap, thanks alot and I really enjoy thease fourms.

[Bonx0007]

Take the black panel off the control half of the warp. Under it you should see 2 sets of jumpers. One set of six pins and one set of 8 pins. We are interested on the eight pin set. It should be on the left side. There are probably four little plastic jumpers going like this:

= =
= =

You want to change this. Take all out and put them in so they go like this:


l l l l

If this is done you can now adjust how much your warp spins when it is activated. The more jumpers you take out the longer it spins when activated. I took mine out from right to left. I left three jumpers in and mine is feeding fine.

I hope this helps. if it doesn't I will take pics and explain more.

[BlackVCG]

Wacko-Micro, you're the one I helped fix this problem in the chatroom right?

[Wacko-Micro]

Yah! Thanks alot again... and I probley shoulda tryied the chat room before posting Ne ways, I got it working, thanks alot! BTW, I am sorry about how badly my home team is going to kill the New England...

[virus]

its going to be the Silence of the Rams.... right black