Building RT Pro

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • xxx_nastynate_xxx
    Registered User
    • Sep 2006
    • 3
    #1

    Building RT Pro

    Hi all,
    I've been paintballing for several years now and never knew anything about automags until recently. My brother let me borrow his RT and I was instantly hooked. I am now trying to build up an RT Pro out of random parts. My question is wether or not minimag and type 68 parts will work. I already have the body, frame and a few other parts. I am mostly looking at Ebay and finding that most triggers and sears and other such misc. parts are mostly minimag parts. Will they still work? Thanks for the input.
    Nate
    Tags: None
    • olinar
      mech>electro
      • May 2006
      • 1777
      #2
      well it depends on what you want.yo build an rt pro you would need a rt rail a retro or x valve.a ule body a trigger frame and a rt sear.OR you can just get a regular automag or minimag and buy a xxvalve or retro valve or even an emag valve.they are all the same.
      also if you want an rt pro its cheaper to buy one from airgun.com or get a paragadigm from themagsmith.com

        Comment

        • xxx_nastynate_xxx
          Registered User
          • Sep 2006
          • 3
          #3
          I already have an RT Pro body and rail. I was wondering about trigger frames, sears, and other misc. parts. As far as the valve, I am a poor, broke airman in the Air Force and still saving for that one.

            Comment

            • Madmarx
              Mentally Unstable

              • Jun 2006
              • 2867
              #4
              You'll need an RT sear and screw. Not an automag or minimag sear. If you're tight on cash just buy a minimag or automag valve w/ level 10 bolt (which I happen to have for sale). When you have more cash trade up to an RT or X valve. Any mag trigger frame should work, but I would go with a 2 finger trigger set up (I also happen to have for sale). Is it a new or older RT Pro? Twist lock or threaded barrel? I happen to have a couple barrels too!
              Hope that helps.
              Good luck!

                Comment

                • Madmarx
                  Mentally Unstable

                  • Jun 2006
                  • 2867
                  #5
                  Check this out if no one on AO has one.

                  http://cgi.ebay.com/automag-minimag-...QQcmdZViewItem

                    Comment

                    • xxx_nastynate_xxx
                      Registered User
                      • Sep 2006
                      • 3
                      #6
                      The body I have is a twist lock with the vertical feed. Does this change the type of barrel I need?

                        Comment

                        • Madmarx
                          Mentally Unstable

                          • Jun 2006
                          • 2867
                          #7
                          Originally posted by xxx_nastynate_xxx
                          The body I have is a twist lock with the vertical feed. Does this change the type of barrel I need?
                          Not all twist lock barrels work with vert feed. I think most are left or right like most mag bodies.

                            Comment

                            Previous template Next
                            Working...