Did I just kill my valve?

[chinstrap]

So I'm having this problem where my trigger is springy, but the marker won't fire when I pull the trigger. I was messing around with the Level 10 carriers and velocity in an attempt to get it to work when the velocity adjuster stopped turning. Now I can't get it to turn either way.

For reference: it's a classic valve with level 10 bolt and a palmers sideline stabilizer attached so I can run CO2 on it.

[MANN]

you cant turn your velocity in or out? try it when its degassed

[chinstrap]

you cant turn your velocity in or out? try it when its degassed

I just fixed it. I had to slap it around a little.

[chinstrap]

By the way, would you have any insight as to why it's not firing? I've tried all sorts of spring/carrier/shim combinations with the velocity way up and the stab all the way up and I'm still not getting any love. I've been at it for 5 hours now. Going a little bonkers here.

Are intelliframe triggers not compatible with classic valves or something?

[Danimal82]

Check your on off assembly, make sure its oiled well. Also try loosening the thumbscrew that holds the valve in. Did you just put the intelliframe on?

[oledude]

Or the opposite with the screw. Make sure it's tightened with an alan wrench to beyond hand tight. One of my mags wouldn't fire if the screw wasn't tight like that.