No shim in the Lv 10 ??????

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sTaLa
    Registered User
    • Mar 2006
    • 333
    #1

    No shim in the Lv 10 ??????

    When I received my brand new mag from AGD, I had a lot of difficulties with my Lv 10. The bolt was sticking and made that "chuff" sound.

    So I tuned it from the beginning, and found out that I had to use a larger carrier. I started with the 2 lines carrier and went smaller until it didn't leak. But when I found the good carrier, it didn't leak at all, whether I pushed on the bolt or not.

    So I poceeded to the chronograph with 0 shim, and the gun did well.

    Have you ever heard of someone not using any shim in his/her Lv 10?

    Thanks again!
    Tags: None
    • Dayspring
      aka- The Day Wang

      • May 2001
      • 9664
      #2
      None of my setups have EVER had shims... And I've been around a while.

        Comment

        • athomas
          Of course it works-its AGD
          • Jan 2002
          • 8039
          #3
          I haven't noticed any difference whether I use shims or not. The amount of change in required travel is so slight, that it really doesn't make much of a difference. I haven't used shims in quite a while and haven't had a problem.
          Except for the Automag in front, its usually the man behind the equipment that counts.

            Comment

            • flyingpootang
              Magtechian with X disease

              • Dec 2005
              • 2276
              #4
              As long as the bolt resets when it supposed to it's all gravy in the navy

                Comment

                Previous template Next
                Working...