Pump mag question.

[Crossing the Ocean]

I just got a Pump Mag that I can't seem to get to work. It is an X valve with level ten and I have all the pieces except for the power tube spacer and the black bumper listed here: http://haveblue.org/tech/automag/pump.pdf

Is there anywhere I can find these items or is there something else I can use that can get me up and running?

[flyingpootang]

If you have a L10 bolt you don't need a power tube spacer. The spacers are used for the L7 bolts. You could sell the L10 since it's only used for anti chop (usless on a pump). For the black o-ring just cut a blue bumper to fit in the inside of the wave spring....

[Dman19]

he's right^^

[RedEyes]

for the spacer i'm not sure, tune the lvl 10 for semi if you have one and it should work. i tried my x valve with my pump and it work. if youre going to use co2 look for a cheap classic valve with lvl 7 and spacers.

[Crossing the Ocean]

Will do, thanks for all your help.