Warp feed body info HELP

[amelot]

I have a warp feed body, and the insert that has the barrel thread in it just slides (falls) right out. Thats all I have is the body, and the steel piece that has the barrel threads. Now I assume I am missing a part/parts, because there is no detents as well. Can someone help me out with what I am missing and where to get it new/used.
Thanks in advance

[grEnAlEins]

I have a warp feed body, and the insert that has the barrel thread in it just slides (falls) right out. Thats all I have is the body, and the steel piece that has the barrel threads. Now I assume I am missing a part/parts, because there is no detents as well. Can someone help me out with what I am missing and where to get it new/used.
Thanks in advance

You mean the body of the gun is a warop body, right? Not the plastic body shells of the warp feed? If you mean the boday of the gun, you need a detent and an angel threaded feedneck thingy (click the link below for a pic, it is the black thing off the side of the body) that comes with the body. Contact AGD and they will hook you up with them.

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=356&categoryID=10

I hope that helps,

Nick

[amelot]

Yes the body of the gun. Its not ule though, its the older (stainless??) body. Its like 2 pieces, the outer body, and an insert piece that has the barrel threads and holds the detent,

[grEnAlEins]

Yes the body of the gun. Its not ule though, its the older (stainless??) body. Its like 2 pieces, the outer body, and an insert piece that has the barrel threads and holds the detent,

FTW?!?! You might have a barrel adapter...? Post up I pic so I can see exactly what you are talking about. If you have a barrel thread adaptor, I will buy it off ya

EDIT: If you have an old SS warp body you need a warp elbow
This or this should do ya.

[MANN]

Yeah you have a "docs machine" automag to autococker thread adaptor is what it sounds like. Like ^^ said post pics, and we can tell you for sure.

[amelot]

getting error when uploading pics
will try again

[amelot]

ok pics in ^^^ post

[egb groupie]

All you need now is a spyder style rubber detent to go in your adapter and a classic rail that has a twist-lock assembly in it. The twist-lock assembly is what holds the adapter tight into the body.

[MANN]

yes that is a mag to cocker thread adaptor. If you are wanting to use cocker barrels keep it otherwise you will not need it.

[grEnAlEins]

yes that is a mag to cocker thread adaptor. If you are wanting to use cocker barrels keep it otherwise you will not need it.

yep. If you don't want the adaptor I'll take er
You'll need the twist lock assem to, as someone said above. This shouls already be in your rail, but they can be found for cheap