xvalve noob help me out

[RoLLonBombs]

ight got the valve today ,put it in isnt it supposed to bounce> like wheni poull trigger should i not be able to hold it down shouldnt it pop back, if it is why isnt it? i turn velocity all the way up

does lvl 10 need to be tuned first?

[geekwarrior]

does it have a ult installed?

[RoLLonBombs]

no ult
straight outta the box xvalve (lvl10 included ofcourse, although not fine tuned)

[Piranti]

Lubrication on the on/off, Input Pressure, and some breaking in period may be required.

Good bounce straight out the box may require higher pressures to get it going. Adjustable tanks like the Dynaflow help alot in adjusting the amount of bounce one can obtain from an RT valve (includes e-mag, X's, RT's, and RT Pro valves.).

[athomas]

ight got the valve today ,put it in isnt it supposed to bounce> like wheni poull trigger should i not be able to hold it down shouldnt it pop back, if it is why isnt it? i turn velocity all the way up

does lvl 10 need to be tuned first?

No, if you hold the trigger down, it will stay held down. The retro valve just helps you to get a faster trigger return and a faster recharge. The higher input pressure you use, the higher the pressure differential between operating pressure and input pressure you will have and the reactive effect will also be greater.

It is not designed to be runaway reactive.