help

[nisser]

e-mag leaking down the barrel i have no idea whats wrong
any help would be great thanks Mikey

[FlawleZ]

e-mag leaking down the barrel i have no idea whats wrong
any help would be great thanks Mikey

Does the marker cycle? How much air is leaking down the barrel? Does the gun have LV 10?

Tell us more about the gun so we can help you better.

[nisser]

no lvl 10 and it leaking alot like when you take the macroline off your asa to bleed your tank

[nisser]

o yah it not cycleing

[FlawleZ]

Okay.

There are several situations that could cause your symptoms. Here's an exploded view of an X valve which is internally the same as an Emag valve which is probably what you have.

<img src="http://students.its.txstate.edu/~kp1143/X-Valve_Exploded.bmp">

The easiest thing to do is to remove the valve and disassemble it and check the integrity of every ring. Make sure there are the proper amount and placement of rings as well. In your case, pay close attention to the on/off assembly. Also, make sure you look at the level 7 part of the diagram.

What's the history on the gun? Are you new to it?

[nisser]

k thx ill try that as to mag im wouldnt say im new to them just rusty. mag was my first semi but i havent shot one in like 3 years + this is a little diffrent from my classic mag

[Tunaman]

If you cant get it going just let me know and I'll fix it for you.

[nisser]

ok just chage the o ring in the on/off now this is what it dose air it up sound like it take a shot i pull the the trigger it gose off like an rt and then when it stops it leaks down the barrel in insight
thanks Mkey

[nisser]

o btw i chaged the 2 bottow o ring in the on off with my classic ones
with the oringals in dont work at all

[nisser]

ok thx for all your help i got it working