lvl# Bolts

[paintballfiend]

Can anyone give me a link to pictures of the different kinds of bolts made for mags. I want to identify the one I have for my mag.
Thanks,
PBfiend

[Tunaman]

There is only two and they are very easy to distinguish between. Level 7- the bolt stem sits almost flush to the bottom of the bolt. Level 10-the bolt stem protrudes beyond the bottom of the bolt.

[LFD92]

you may not have a level-anything as well. there is also an ANS Phase 2 (this is written on the base of the bolt on the side that faces the valve)

[Tunaman]

If it is anything else...toss it out.

[don miguel]

And don't forget the 32 degrees venturi automag bolt, look it up on pbreview.com. That thing is sweet.

[Tunaman]

And don't forget the 32 degrees venturi automag bolt, look it up on pbreview.com. That thing is sweet.

This is one of the worst bolts ever made. Don't EVER use anything with "32......" in a Mag.

[don miguel]

This is one of the worst bolts ever made. Don't EVER use anything with "32......" in a Mag.

It looked sweet at least. Was it really that bad? was it lvl7 or lvl10?

[grEnAlEins]

Don't EVER use anything with "32......" in a Mag.

Where was this piece of advice when I first got my mag?!