Intentional full auto

[blitzmercenary]

before you ask, yes i searched for full auto mods, etc, but couldnt find what i want. i want a way to mod a mech mag to be reliably full auto. im building an m1a1 thompson smg and have no way to fit electronics in the gun, as it will be using real parts, including the trigger frame. any help will be greatly appreciated.


what i currently have:
lvl 7 classic mag
pf/hl body
32 carbon fiber barrel (sucks)
nothing special, but eventually is will be nice.

[geekwarrior]

rt valve and 900 psi

zak vetter

[don miguel]

That is sweet!!!!!!!!! I didn't know an rt could do that!!!!!

[MMaglpc]

of course u didnt don lol!

[jenarelJAM]

do it with an emag on hybrid and you don't even need the 1000+ psi

Back on topic: wasn't it something like, you had to sand down the on/off pin a little bit? I know I've heard people do that before...
BTW: don't do that just because I said so. Look it up, have other, more knowledgable people tell you about it.

[ZapTheMad]

Does a classic valve recharge fast enough for "full auto"?

[DaFin]

Does a classic valve recharge fast enough for "full auto"?

Yes, but what do you define as full auto? Contiuously cycle, sure but 8BPS or 20BPS?

[sTaLa]

Does a classic valve recharge fast enough for "full auto"?

If you want to have rapid fire with a Classic valve by rising the pressure, you won't be able to. You can only do it on an RT/X valve. Higher pressure on those valves will make the trigger rod come back faster and stronger, therefore the more bounce. This method is not really a full auto... it's more a side effect of the RT Valve that gives you a sweet spot.

An airsmith at my local shop told me he used to modify mags by putting a spring between the sear and the grip frame to make the trigger rod comes back faster and stronger. He told me that modification gave him a sweet spot with and incredible fast ROF... I'm supposed to go see him tomorrow.

[gotboostedvr6]

^ make sure you get alot of info on that...

[spike_ball999]

^ make sure you get alot of info on that...

I agree. There could be some potential in it to make the ULT work better in a Classic valve, with or without the sear mod. Hmmm.

I get to try the experiment first!

[ZapTheMad]

I'm one of the guys shooting 32 BPS in those zak vetter clips. Not going to happen with a classic valve LOL!

[blitzmercenary]

thanks. im not so much worried about the classic since i will be getting an xvalve once i get rid of my borg.

[nevtangle]

What about a Hyperframe w/ a 20bps full auto board in it? Hitech posted a vid some time back w/ a classic valve doing 20bps.

[blitzmercenary]

i would like the hyperframe, but whatever gun i make this into (im debating between a sopmod m4 or a thompson m1a1) will use the real guns trigger frame. it will kinda be like reapers customs (www.reaperscustompaintball.com ?? maybe?)

[ZapTheMad]

My opinion is to use the Ion for a project like that. It's real easy to adapt a body in any configuration since there is only 2 hoses connected to the body to make it work. All the rest can be anywhere, including inside the parts of a real firearm. The nice thing is, with all the anti smart parts going around, you don't have to buy anything made by smart parts. Everyone and thier mother are making aftermarket parts.