ULT question

[autococker04]

hey, i was wondering if the ULT will work with a ANS valve with a mini mag front part of the valve thing ( i kno im poor still saving for valve)

also what are these parts called the front and back of the valve that is

thanks!
__________________

[2BAD4U]

The 3 main area's of the Valve Body : 1-Pressure Regulator(rear). 2-On/Off Valve(middle). 3-Power Tube(front)......

[MANN]

It was not made for the no reactive valves, but some have gotten it to work. It will feel odd when pulling the trigger if you do decide to get one.

[ghostdog2019]

Its possible

Like Rogue shows above it is not suggested but with some very good tuning and proper trigger pulls you can put a ULT in a classic/minimag valve. I have one in mine now and it works fine I have 4 shims in a minimag valve. I will get a short stroke once in a while only when I try to walk the trigger. I would not say it is the most reliable option but it does feel nice when you barely have to pull the trigger on a minimag valve.

-Mike Brothman