rt valve leaking down the barrel

[68_Classic]

would buyin a lvl 10 for my rt valve stop the leaking down the barrel ?? put new powertube o-ring and styll leaking down the barrel

[don miguel]

Are you tightening the power tube tip? if not, try that. DON"T OVERTIGHTEN!

[68_Classic]

ya it is tightend

[ghostdog2019]

Powertube Spacer

Sounds like it could be your powertube spacer they sell replacements on airgun.com, but I would highly suggest the level 10 not just to fix the leak but quite frankly one of the best upgrades you can get (who needs eyes)

-Mike Brothman

[68_Classic]

so a lvl 10 will fix my leaking problem

[ghostdog2019]

Check entire Valve

First make sure you look over all your orings in the valve for any damage. As long as everything is clean and undamaged then a level 10 with some tuning will fix your leak. However the level 10 is $85.00 a little costly just to fix a leak, but like I said before the best upgrade you can get in my opinion.

-Mike Brothman

[68_Classic]

my friend has a lvl 10 i am gonna get from him for like 50 so... i guess i can't go wrong... i used to have a x-valve on my other automag but i sold it so i know how to tune it good so... but all the o-rings are good so i guess i gonna buy a lvl 10 tommorow from my friend thanx for the help man

[ghostdog2019]

Your Welcome

Anytime I can give some help I try. Your welcome

-Mike Brothman