Durable Powerfeed elbow?

[jester_s1]

Is there anyone who makes a 45 elbow that isn't flimsy plastic? I went through several of those with my vertical Spyder before getting smart and switching to a metal clamping one for it. Has anyone solved this problem for mags?

[don miguel]

this is what you need:

This is a "feed yoke" made by PPS (palmer persuit shop). go to thier host website and check it out
link
good luck, I have never used these but it looked like what you needed.

[kevdupuis]

Atomic elbow from Allen paintball products. Click on miscellaneous.

http://www.allenpaintball.com/retailframeset.html

[MANN]

60 bucks for a metal 45?? Thats outrageous. Buy another body.

Durrable and elbow: just isnt gonna happen

[jester_s1]

Yeah, that palmers one looks really good, but that's more than I paid for my mag. I ordered a couple of the atomic elbows so we'll see how they do.
Thanks guys.

[RobOpel]

http://www.proteamdirect.com/arprofel.html

Thats what you need. Ive used one on my rt feed cocker for years and it works great on my pf mag too. Its a softer plastic so its got a little bit of give and it grips feeds really well.

-Rob

[MANN]

Yeah, that palmers one looks really good, but that's more than I paid for my mag. I ordered a couple of the atomic elbows so we'll see how they do.
Thanks guys.

Thats what I have. They work great. They are sorta a soft plastic. If you have any problems with your hopper fitting cut out a notch in the elbow, and use a radiator clamp. It will look getto, but gets the job done

[don miguel]

Oops, didn't check the price on the palmers one my bad. What is the "atomic elbow" made of?

[MANN]

some type of soft plastic. It will not crack, but still is very ridgid

[Spider-TW]

Don't clamp it too tight, though. That's part of the problem with all of the broken feed necks. It's better to pick up a whole loader off the ground rather than a loader without a feed neck.

[spectre184]

http://www.proteamdirect.com/arprofel.html

Thats what you need. Ive used one on my rt feed cocker for years and it works great on my pf mag too. Its a softer plastic so its got a little bit of give and it grips feeds really well.

-Rob

2nd

I use style like this. Better to tighten with screw driver than with electrical tape

*edit* I just looked at my marker and it's the exact same one I have. I've used it for like 4-5 years +/-??? Only thing I've done to it is replace bolts and nuts

[Piranti]

The elbow i got with my Phantom is real nice and sturdy, hrm lemme see which one it is .................................................. ......


hrm, nm i canna find it its in my pile of stuff somewhere....