My xmag's eyes aren't detecting the paint I use. I use WPN Weapons Grade which is 2 color green and brown. I have tried it on both settings and neither work. It just doesn't fire. Is my only option to pick up an xmod?
-
-
turn of the ACE and go play. You dont need no stinkin' ace in these guns... -
Well I would think changing your paint would be the quick fix
Comment
-
So does it detect other paint besides the one you use? Since you have that Euro ACE Version, is there an adjustment for it that you can see anywhere? If you are that concerned about eyes and your board is fried, contact Grazymoto and see if he has anymore functioning ACE boards.
Comment
-
Hmm... I'll try another kind of paint (WPN Toxic). Toxic is very, very shiny and one color, so maybe that will help. It can go without eyes because of the level 10 but every once in a while (maybe one ball per bag or sometimes less) will chop...
The only way of adjusting the eyes is via the board where it has 3 modes (I think the American version has the same). ACE 00 is eyes off, ACE 01 is eyes on for one color shelled paint, ACE 02 is for 2 color shelled paint.Comment
-
Those are just settings, I meant an adjustment screw for ACE sensitivity like all XMags have. But I know nothing really about that early/Euro version of ACE. It may not have any adjustment.Originally posted by CabooseComment
-
Where is this screw?Comment
-
It is on the ACE board and the adjustment area is on the left side of the frame but you don't have a board. Yours is 2 wires running from the eyes to the mainboard. That's what I asked if you could look to see if this system had an adjustment screw anywhere.Originally posted by Caboose
Level X will do a kick butt job for ya!
Comment
-
Yeah, that is what I thought.Comment
-
Ok, found the sdjustment screw. I put the paint in and turned it every which way, pulling the trigger while adjusting. Still nothing. Am I turning it the wrong direction or am I just retarded?
Comment
-
actually, the xmags ace is what is retarded. sigh.
Comment
Comment