Feed Tube w/ ULE Centerfeed?

[Link44]

Does anyone know of a good method to take off the feed tube for the ULE Centerfeed? Ive tried pretty much everything and dont want to scratch it.

[rtfire1]

towel and pipe wrench

[spectre184]

towel and pipe wrench

What about something like this Craftsman Strap Wrench

[MANN]

If your replacing it just scratch it.

or use a nepreme (sp) peice of clothing and a vice if you dont want scratching

[2BAD4U]

towel and pliers or if your going 2-replace it , drill a 3/4'' hole thruogh the feedneck & stick a screwdriver through the hole & turn it 2-the LEFT ......

[spike_ball999]

Here's the best way I've found so far: get a wide and thick nylon strap and use a vice wrench on it. Works wonderfully.

[phizz]

The strap wrenches work great in most cases but I do find they slip on items that are smooth/or extremely tight. in those cases I wrap the item with the strap wrenches thick rubber and clamp a vise grip on it, and voila!

[PumpMag]

oops already scratched it

Yeah, I got too impatient, used old rags and a vise grip wrench......


Scratched it.

Oh well, I never put to orginal feedneck back on anyway!

[SR_matt]

if you heat it up the loctite normaly will melt so it won be sealing it as well but o well a little to late i guess
-matt