Tac 1 warp feed left longbow

[BIGDOG 187]

I just got a tac 1 from tune, warp feed left. I am looking to get a longbow shroud & stock kit to run with it. What do I need to make it work?

[Thanna]

I just got a tac 1 from tune, warp feed left. I am looking to get a longbow shroud & stock kit to run with it. What do I need to make it work?

Depending on which rail you got with the TacOne, You might need to get a new rail. The newer tacone rails do not have the sight mount holes that the longbow shroud mounts to. Also I'm not sure if the warp feedneck will overlap with the shroud. Then you might have to mill/dremel/sand a notch on the shroud to make it fit. You could try and getting the T2W-stock kit instead. That one mounts at the bottom of your grip.

Hope this helps.

has pic of the longbow shroud setup and the older style tacone rail.

http://www.pbreview.com/products/reviews/4085/

links to the t2w stock. not quite as cool looking, but easier to work with.

http://www.specialopspaintball.com/shop/product_detail.asp?SKU=210+0046&CAT=109201

http://www.specialopspaintball.com/shop/product_detail.asp?SKU=210+0045&CAT=109201

[BIGDOG 187]

My rail dose not have the 3 holes can I drill them out.

[athomas]

You should be able to drill and tap them yourself.