challange for bridgeport airsmiths! LONGBOW fix

[Sumthinwicked]

well i have the new tacone rail on my tac and i own everything to make the longbow but alas i cant cause noone has thought of making lil inserts for the shroud on the rail there is a lil area where the screws could fit if some filler inserts were placed inside the dents in the rail someone has to have these if not can someone make me some damn

[Sumthinwicked]

luke ? rouge ? tuna ? come on someone ?

[MANN]

are you just needing an alum spacer? pics would help.

[Sumthinwicked]

2 with 3 screw holes in them so i can mount my damn stock

[luke]

I could probably make them, but I don't really know what you want.

[MANN]

pics of how wide the space is, and where it is going would clear things up

[flyboy]

pics of how wide the space is, and where it is going would clear things up

He's looking for plates drilled to go where these holes are on both sides of a tac one body for a long bow.

[Piranti]

The plates he is talking about actually should have come with the kit, well least mine did. When I get home i can post up pics or at least measurements of them. If you have a drill and access to a hardware store can probably make them yourself.

They are like a quarter inch wide by 1.5 - 2 inches long probably about an 1/8th of an inch thick, dont quote me on this but thats off top of head of the measurements.

[flyboy]

The plates he is talking about actually should have come with the kit, well least mine did. When I get home i can post up pics or at least measurements of them. If you have a drill and access to a hardware store can probably make them yourself.

They are like a quarter inch wide by 1.5 - 2 inches long probably about an 1/8th of an inch thick, dont quote me on this but thats off top of head of the measurements.

Well he bought the stock from me, and I had lost the plates. I wasn't using the stock and my garage is a black hole.... An extensive search for them turned up nothing.

[Sumthinwicked]

http://www.putfile.com/pic.php?img=4136062

[Piranti]

Hrm I think you may need a different rail. That rail you posted a link of does not have the mounting holes. If you wanted to use that rail specifically, one would hafta drill and tap the appropriate holes into your rail, and since it looks like you have different recesses where the mounting holes will be would need custom made spacers to go between the rail and longbow shroud.

The photo Flyboy posted is the proper Tac Rail to be used with the longbow kit. Or one of them which does accept the stock spacers from Special Ops Longbow Kit.

[SR_matt]

you should be able to just tap that rail (you will have space between the rain and the stock but i think tight screws will keep the stock in place. i have that rail on my mag and there is a lot of metal left inside so i think you should be able to do that but the only issue would be leavin the space might leave it lose

-matt

[Sumthinwicked]

that was the idea put a spacer into the slot that has holes for setscrews and using pressure on the spacerplates via screws i think that should hold it into place

[Sumthinwicked]

like a clamp basicaly

[athomas]

Rather than have a duct tape and haywired gun, I would get the proper rail and do it right. It'll save you aggravation down the road.