installing anti-siphon

[wjr]

I just got two anit siphon tubes in the mail from a guy on MCB.

This afternoon I tried installing them on my tank. I heated up the valve and took it off. Now that I'm looking at the valve, I'm confused. I read the docsmachine page on anti-siphon tubes, and it doesn't adress my problem.

Here's what it says on installing them:

Actual installation of either tube is as simple as removing the threaded plug that holds the pin spring in place, and replacing that with the threaded portion of the tube to be added.

My valve has no such threaded peice as far as I can tell. How am I supposed to install it? Solder the copper tube straight on?

It came from a Brass Eagle tank that I got from the wal-mart/blue rhino trade in if that helps.

[don miguel]

hey to save yourself, i would have a certified airsmith do it so you do not get sieriously injured! unless you are an airsmith, if so go ahead. just wanted to warn ya.

[flyingpootang]

There are a few different type of vales so yours may not be the type discribed at Doc's Machine. You can get everything you need to make a J tube from Home Depot's plumbing dept. As for safety make shure the tank is empty and you don't apply to much heat to break the lock tight. Instead ofgoing though all the trouble you may be better off getting a compressed air system off of Ebay for 35-50 new.

[MANN]

hey to save yourself, i would have a certified airsmith do it so you do not get sieriously injured! unless you are an airsmith, if so go ahead. just wanted to warn ya.

c02 is not that dangerous

[wjr]

hey to save yourself, i would have a certified airsmith do it so you do not get sieriously injured! unless you are an airsmith, if so go ahead. just wanted to warn ya.

Why yes, as a matter of fact I am an airsmith.

There are a few different type of vales so yours may not be the type discribed at Doc's Machine. You can get everything you need to make a J tube from Home Depot's plumbing dept. As for safety make shure the tank is empty and you don't apply to much heat to break the lock tight. Instead ofgoing though all the trouble you may be better off getting a compressed air system off of Ebay for 35-50 new.

I've already got a compressed air tank. I like co2 more (more places to get fills, smaller tank, lighter).

[don miguel]

Why yes, as a matter of fact I am an airsmith.




I've already got a compressed air tank. I like co2 more (more places to get fills, smaller tank, lighter).

good, i just waned to make sure. and i do think co2 is pretty dangerous, because i have seen an out of date tank come loose by what looked like a millimeter. and it froze the little girls tippman (10 yrs) wich was in bad shape to begin with. this happened at fox4 in october. it looked dangerous, but the refs, especially chris (head ref there) took care of it. it looked dangerous to me, but since your an airsmith, go ahead and do it.

[ZapTheMad]

There should be a threaded pipe plug in the back of the pin valve. It has a hex socket in it with a hole drilled thru the plug. You should be able to stick an allen wrench in it and unscrew.

If not, perhaps they are pressing them in nowadays. Get a new pin valve with the threads.

[wjr]

It's just a circular hole. No hex socket.

You can always trust Brass Eagle to do something like that.

[Dewok82]

It is a Brass Eagle tank? I know some of the Pure Energy pin valves lack the proper fitting for A/S tubes, but I didn't know Brass Eagle pin valves did too.

You may want to consider taking your tank to Wal Mart and doing the tank exchange. That way you get a fresh hydro and hopefully the right style pin valve.

[wjr]

It is a Brass Eagle tank? I know some of the Pure Energy pin valves lack the proper fitting for A/S tubes, but I didn't know Brass Eagle pin valves did too.

You may want to consider taking your tank to Wal Mart and doing the tank exchange. That way you get a fresh hydro and hopefully the right style pin valve.

I'd gotten two tanks from wal-mart using the trade in program. One was a brass eagle cylinder, and the other was a no name (I'm pretty sure it came from a 98 custom package).


I found that not only the Brass Eagle, but also the other tank have identical valves.

Mabye Blue Rhino replaces the valves on the tanks when the fill them.

[don miguel]

I'd gotten two tanks from wal-mart using the trade in program. One was a brass eagle cylinder, and the other was a no name (I'm pretty sure it came from a 98 custom package).


I found that not only the Brass Eagle, but also the other tank have identical valves.

Mabye Blue Rhino replaces the valves on the tanks when the fill them.

your 14 and an airsmith?

[wjr]

Yes.

[MANN]

and i do think co2 is pretty dangerous, because i have seen an out of date tank come loose by what looked like a millimeter. and it froze the little girls tippman (10 yrs) wich was in bad shape to begin with. it looked dangerous, but the refs, especially chris (head ref there) took care of it. it looked dangerous to me, but since your an airsmith, go ahead and do it.

How is that dangerous? CO2 is not nearly as violent as Nitro. CO2 is not flamable, and a very low pressure. The only problem that CO2 could cause is actually bursting or having the valve come out. Both are HIGHLY unlikely. sorta like being struck by lightning

[2BAD4U]

4-get anti-sphon

If you prefer Co2 cause it's easy 2-get than compressed air , get a 6stage expansion chamber . 4-get anti-siphon .

[turbo chicken]

walmart tank exchange

what is this walmart tank exchange thing you guys
are talking about???