Power of the Warp Feed?

[Reforged]

Im building a project but I need to know if the Warp feed is able to handle feeding balls at least 20 BPS up a 4 foot long tube.

Any info would be great, Thanks.

[BigEvil]

Im building a project but I need to know if the Warp feed is able to handle feeding balls at least 20 BPS up a 4 foot long tube.

Any info would be great, Thanks.

A 12v modded warp should be able to handle it, but probably with really bad battery life.. 4', thats a long way. What is that about 100 balls to push?

[Pneumagger]

Im building a project but I need to know if the Warp feed is able to handle feeding balls at least 20 BPS up a 4 foot long tube.

Any info would be great, Thanks.

just run 2 cascading warpfeeds with a halo feeding the bottom warp. Better have some tough paint.

/me predicts alot of time spent cleaning warps for you.
//good luck

[scion]

I don't know. But how about a Q-loader? What's your project?

[Reforged]

Im building a backpack hopper, its going to hold around 1000 rounds, and it will be fed to a Tippmann A5

[Chronobreak]

Im building a backpack hopper, its going to hold around 1000 rounds, and it will be fed to a Tippmann A5

dual warpfeeds at 12 vlts each would be the way to go, gonna have to run a long double intellifeed setup as well, or pulse like rf.

one warp on the gun and one on the pack

there is alot of post about similar projects on AO, just gotta do some searching

ive been messing with halos/warps for some time now, lmk if ya need anymore help/info

[borph]

Im building a project but I need to know if the Warp feed is able to handle feeding balls at least 20 BPS up a 4 foot long tube.

Any info would be great, Thanks.

There are a few threads on this subject, but here's what AGD had to say.

http://www.automags.org/forums/showthread.php?p=1294661&highlight=agd#post1294661

[Chronobreak]

where would i obtain one of these cog belts?

or know what size i need exactly?