is there preset tanks over 900?

[nathanjones008]

besides buying a flatline system or buying a maxflow reg for my rt, is there any preset tanks are go to 850 to 900 or even higher? trying to go the cheapest route. i want full wrath of x/valve

[Pneumagger]

My nitroduck HP preset output about 925psi... but i sold that over the weekend.

Get just about any quality preset reg. Take it apart and shim the regulator a bit. Do this in small increments so as not to output like 2000psi the first time. This will work. It will take time and lots of air to get what yuo want. Please use a gauge on a solid test ASA for safety.

As long as you reassemble the reg correctly and use a dedicated test ASA with gauge, you'll be safe. Most presets can be serviced and shimmed while still on the bottle, just make sure to empty the bottle first.

[Piranti]

Or you can contact and use a centerflag regulator and talk to the tech's on the phone and they can set you preset to whatever you wish it for. Friend got his set to 950 Tech immediately knew it was for a Mag

[Zneaky]

I sent my 68/4500 to crossfire, they hydroed it and out a new reg on it. They set the output to fixed 925psi. They only charged me $70. Awesome deal. go to their website and print out the coupon.

Z

[Pneumagger]

You all realize when they are "presetting" the tanks all they are doing is shimming the mainspring. Why go through all the hassle of shipping and paying someone?

Any crossfire/nitroduck/pure energy/etc can be shimmed.

[luke@york]

does anyone know the maximum out put pressures on a smartparts maxflo adjustable reg and a nitroduck xstreem adjustable reg, this is for my new magsmith rt xvalve.


manythanks

luke

[BigEvil]

Or you can contact and use a centerflag regulator and talk to the tech's on the phone and they can set you preset to whatever you wish it for. Friend got his set to 950 Tech immediately knew it was for a Mag

DITTO. They are mag guys over there.

[Remagk]

You all realize when they are "presetting" the tanks all they are doing is shimming the mainspring. Why go through all the hassle of shipping and paying someone?

Any crossfire/nitroduck/pure energy/etc can be shimmed.

Any step by step intruction / how to ?
pretty interesting.

[MyTh_ReMuS]

so 925 is the best reg pressure for a mag

[FA22RaptorF22]

isn't that the best for emode? i thought that about 1000 ish was the best for rapidfire though.