I was curious to know, what boards are out there for hyper frames now. I currently have one and I might change the board in it down the road. What do you guys recommend? How hard would it be to do it myself? Thanks for your input.
-
-
The devilmag uses a predator board, or so I've heard. But I'm not sure if he used a hyperframe as well as the special 90* frame. -
Cool, thanks for the info. Anyone else. Can the virtues be instald?
How hard is it to do this? Will everything in the frame have tobe replaced?Last edited by chill will; 12-20-2006, 12:16 AM.Comment
-
No, you can use the stock parts as long as you find a board that will fit in the Hyperframe.Comment
-
I use the stock 20bps board with a activation screw (6/32) drilled/tapped in the trigger, emag valve w/ .710 on/off, and settings of IS 04, Fd 01, Fn 05. With a propperly set trigger activation screw it is very close to ramping 15bps rate of fire witout the extra added shots. If you are going use a Pred II board you will need a capacitor for the solenoid. Pm rudz for how its wired he use to own a devilmag and may have the info your looking for. Also PredII boards are kinda hard to find since tagsportz.com dosent offer them any longer. FYI a spyder/scenario dreams T-board use the same type solenoid and may fit in the Hyperframe.Comment
Comment