Alright i got a rt when they first came out and well obviously i haven't played with it in a long time. I bought a rebuild kit for it and replaced the o-rings in the gun but it has a small leak out of the back reg and then will have a burst of air pop out and then go back to the small leak. What o-ring would end up causing this. Cause all i want to do is get it back in working order and put it back up to keep. Thanks.
-
-
so no one knows what oring it would be or anything?? -
Try adding 5-6 drops of oil in the input port for air. For you it should be where your banjo bolt is installed. You should also try turning down your velocity. If your velocity is low already it may be the reg piston oring. They get dirty, and can cause a small leak. Try the oil and velocity first, and report backComment
-
aight i'll try that, can't get to it right away cause gun isn't with me but i will fri. thanks.Comment
-
I had one hiss and pop out the back like you said. Turn the rear screw to the left a bit and/or oil your orings like MANN said.Comment
Comment