Help!

[bigguy]

Help!
ok, i've got an xvalve and a level 10 (obviously)

i want to use my mag to play reball (we have practice tonight!)

but i need to signigicantly lower my velocity (more than just using the valvle adjustment)
i know that i need to switch out my spring for the red harder one...but...when i do, my mag won't shoot at all! it's almost like it's too much pressure for the bolt to move forward! what do i do?!?! i have practice tongiht! help me out!

should i cut my spring so it's shorter or what?

[geekwarrior]

how low are you trying to go?

[behemoth]

how low are you trying to go?

How low can you go?

Can you go down low?

All the way to the flo'?

[BigEvil]

Put the red spring in, turn the velocity adjuster until it fires. It should get you where you need to be. Unless you are looking for 190fps.

[bigguy]

i have tried turning the velocity down and up until it fires, but still doesn't I beleive i have to get down to 140 fps! what do i do?

[geekwarrior]

i have tried turning the velocity down and up until it fires, but still doesn't I beleive i have to get down to 140 fps! what do i do?

140?!! you're sure you don't need it at 240?! 140 is slooow. Not sure it will shoot that low.

[StygShore]

140

140 fps... gives you a range of maybe 20-30 feet with a reball

Might want to check the specs again and make sure it aint 240.


Styg

[Nick E]

140 fps=95 mph...with something the size and weight of a reball..it isn't going very far...won't that be almost half the range of a paintball, or less...

[bigguy]

oofta...sorry guys!

ok i checked and i think it is about 200 fps...but i still can't get my gun down that far

[Tunaman]

If you don't use the gold spring it will never go that low. 200 is pushing it.