Upgrade Q: the ULE center feed on a Classic

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sup909
    Registered User
    • Jul 2006
    • 63
    #1

    Upgrade Q: the ULE center feed on a Classic

    Hi I have an automag classic and I am thinking of upgrading my mainbody to the ULE vertical feed. On the page for the main body is the following quote.

    If you want to put this on an Automag/Classic or Minimag, you will need to press the twist lock assembly out of the rail.
    What exactly does this mean?
    Tags: None
    • Automagrt666
      Pneumag Pneub
      • Oct 2006
      • 157
      #2
      The ULE bodies use Autococker threaded barrels, not AGD twist-lock, and if you put the ULE body on an older AM/MM rail then you need to push out that little pin that the twist-lock barrels hook on to. They shouldn't be too hard to push out.

      Nick

        Comment

        • gus13
          All Hail The Crimson King!
          • Oct 2006
          • 190
          #3
          that little spring loaded "nubbin" on the rail, as the ULE bodies have the Cocker threads they don't have a hole for the old school nubbins to lock the barrel in place that were originally on the rail. its easy enough to pop out just push.

            Comment

            • sup909
              Registered User
              • Jul 2006
              • 63
              #4
              Ohh ok, that seems simple enough. I was confused as to what they were talking about on that.

                Comment

                • zipity_Bop
                  hoopityWhatWhat
                  • Feb 2006
                  • 330
                  #5
                  !!

                  use a punch.... no tap=bad experience and ugly rail...

                    Comment

                    Previous template Next
                    Working...