xmag problem

[jester2844]

my xmag shoots fine for the first 20-30 shots then it looses pressure to the trigger then i have to degas then reair it up has anyone had the same problem just looking for some help thanks

[echoback]

Have you oiled it recently? Drop 3-4 drops of oil into the ASA, screw on the tank, and fire several dozen times. The on/off pin could be getting stuck, or the bolt might be sticking in the powertube.

If that doesn't fix it, try switching to the next larger Level 10 carrier. Might be sticking that way.

[jester2844]

thanks some on asked if it was the dwell is it possible to change the dwell on the agd 3.2 software

[BigEvil]

thanks some on asked if it was the dwell is it possible to change the dwell on the agd 3.2 software

No dwell adjustment on 3.2. Sounds like something is hanging up. Make sure #1 that you have at least 700 psi going into the gun. #2, that the on/off pin and everything else is thoroughly lubed, #3 the battery is fully charged and then go from there..

Could be the noid plunger is out of spec or something around those lines.

[athomas]

How old is the bolt spring? Try changing it. If it is worn and weak, it could cause bolt stick which has the symptoms you are experiencing.

[jester2844]

thanks guys