My mag RT classic has something wrong with the trigger. If you air it up and just touch the trigger it jumps into like a full auto mode. Or sometimes, you can pull the trigger and nothing happens. But it you flick the trigger it works, but the full auto starts again Ive checked out the sear and it seems normal. Im thinking its the on/off, maybe the pin????? It seems normal though but I dont know. Any thoughts? I posted a question about this previoulsy but I narrowed down the problem. Any help would be greatly appreciated.
-
-
Might be ur power tube spacer. More than likely you right when u say its the on/off.
Clean it out, re-lube, oil, and try it again.
Cant beat the trouble shooting process for a mag,... lubing and oil with a little bit of well minded PM'ing can stretch the life of these markers well beyond any Ego will ever see.
When I get my latest project off the ground,.. I always had an idea to make a troubleshooting flow chart for each mag valve out.
Kinda like a gun mat with all the pieces layed out on it and a way to color code the parts as you clean and work on putting it back together to deal with the common issues on AGD valves._______________________
Jai "P8ntbal4me" Menard -
As mentioned, take the valve apart and clean it. A piece of dirt could cause your problem. At least by cleaning and putting it back together, you get to inspect the orings and and can rule out possible faults relating to those parts.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment