oring sizes in the xvalve?!?!

[phat4life07]

hey does anyone know what the oring sizes are in the xvalve???

[Pneumagger]

hey does anyone know what the oring sizes are in the xvalve???

Find the Xvalve exploded pic on AO or the AGD site. That should have the corresponding oring sizes. Also, try calling AGD for the specific oring size your looking for. Don't forget to buy the right size, type, AND durometer.

[Tunaman]

hey does anyone know what the oring sizes are in the xvalve???

You will never get the right ones for the price you want unless you by 10000 at a time. I suggest AGD or myself if you need a handful or something...

[phat4life07]

actually thats not necessaraly true, ive been buying orings for my guns for the past three years now at 29 cents each at my locak hardware store, im sure mags use standard sized orings cause i highly doubt AGD make their own.

[MANN]

actually thats not necessaraly true, ive been buying orings for my guns for the past three years now at 29 cents each at my locak hardware store, im sure mags use standard sized orings cause i highly doubt AGD make their own.

The hardware store makes great replacement orings for tippmanns and spyders. You will not find the quality/size oring for a mag at a hardware store.

[PyRo]

The hardware store makes great replacement orings for tippmanns and spyders. You will not find the quality/size oring for a mag at a hardware store.

The o-rings you're getting from AGD are of a higher quality than what you will find at most hardware stores.

[RobAGD]

Butal vs ureathane there is a winner

There is a differnt in how the react to high pressure and oils. The Ureathane orings will hold up longer and wear better as well than the butal ones. Also the hardness will be a 70ish vs 90 for U

-Robert