Why

[WOLLFFY]

Can some one please tell me why all of a sudden my 68 classic has started shooting full auto, and then sometimes not reset and just leaks out the barrel?

[wjr]

Can some one please tell me why all of a sudden my 68 classic has started shooting full auto, and then sometimes not reset and just leaks out the barrel?

Sounds like an issue with the on-off. Lubing it might help.

And, were you interested in the Blazer I had for sale? I deleted all of my pms. Sorry for the hijack...

[WOLLFFY]

Already

Sounds like an issue with the on-off. Lubing it might help.

And, were you interested in the Blazer I had for sale? I deleted all of my pms. Sorry for the hijack...

I already tried that thanks.

[PumpMag]

time to actually replace parts

Other than soft parts, the Sear and Bolt are two parts that wear out the most.

If you look at the edges of where both make contact, you'll see quite a bit of wear.

Time to actually go to the AGD site/call Marcia and place your order.

[Coralis]

Before replacing the sear and bolt inspect them for wear , more than likely the bolt spring(main spring) is probably in need of replacing

[WOLLFFY]

Before replacing the sear and bolt inspect them for wear , more than likely the bolt spring(main spring) is probably in need of replacing

Can someone please tell me how many oringd I should have on the on/off into the valve?

[PumpMag]

You should have a total of 4 orings. Look at your laser engraved diagram at the bottom of the AIR assembly. 2 white teflon orings and 2 yellow orings. Match the diagram.

[Coralis]

or look here http://www.airgun.com/downloads/valveexplodedview.pdf

[WOLLFFY]

t

Thanks for your help you guys.