Which On/off do I have?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • AlphaPaintballRef2
    Rocket Scientist
    • Jul 2006
    • 95
    #1

    Which On/off do I have?

    Ok, I picked up a mech mag a while ago and it was described to have a ULT kit in it. I can't get the two halves apart of the on/off assembly so I am kind of skeptical. They're not generally loctited are they? I didn't want to take a flame to it unless I was pretty sure. So, can I tell by the on/off pin or some other way?

    Also, I know Emags are not supposed to have ULT kits in them...but why exactly? Wouldn't it lessen the force the noid would have to exert on the sear thus extending life and lowering dwell? Also, it would be nice in mech mode as well. So there must be something I'm missing as to why its a bad idea...anyone know?
    Thanks in advance!
    Tags: None
    • Nick E
      Custom User Title
      • Sep 2006
      • 197
      #2
      ULT's aren't supposed to be in e-mags becasue they don't force the giant noid back quickly enough. Now, for a hyperframe/booyahframe or other, it's fine, because they use a smaller noid. You can tell if it's a ULT because the pin will have a tiny hole right in the center of it.

        Comment

        • nate2k191
          texas a+m maroon
          • Feb 2003
          • 1170
          #3
          look at this thread http://www.automags.org/forums/showthread.php?t=209490
          -fully upped mech mag (magzilla) www.havoc-online.com
          -upped 68 mag (class) My Feedback AIM = nate2k191
          -live in peace TK-
          AO-TX

            Comment

            • AlphaPaintballRef2
              Rocket Scientist
              • Jul 2006
              • 95
              #4
              Originally posted by Nick E
              ULT's aren't supposed to be in e-mags becasue they don't force the giant noid back quickly enough. Now, for a hyperframe/booyahframe or other, it's fine, because they use a smaller noid.
              Makes sense. I should have thought of that .

              Thanks again for the info guys!

                Comment

                • Nick E
                  Custom User Title
                  • Sep 2006
                  • 197
                  #5
                  I got a related problem, I think on of the O-rings in the ULT may be the cause of my troubles, but I can't get the little pin out...any suggestions, before I mess it up pulling and hauling on it?

                    Comment

                    • nate2k191
                      texas a+m maroon
                      • Feb 2003
                      • 1170
                      #6
                      Originally posted by Nick E
                      I got a related problem, I think on of the O-rings in the ULT may be the cause of my troubles, but I can't get the little pin out...any suggestions, before I mess it up pulling and hauling on it?


                      you should be able to get those o-rings off without having to take the pin out. However, i think the silver pin might unscrew in the middle - i'd need someone else's knowledge to confirm this though. dont ruin it just yet.
                      -fully upped mech mag (magzilla) www.havoc-online.com
                      -upped 68 mag (class) My Feedback AIM = nate2k191
                      -live in peace TK-
                      AO-TX

                        Comment

                        • Nick E
                          Custom User Title
                          • Sep 2006
                          • 197
                          #7
                          That's what I feared...Any way to gt the locktite off without ****ing up the pin/housing? And I haven't been pulling and hauling on it, that's why I asked lol

                            Comment

                            Previous template Next
                            Working...